LOUIS AQUA 15 kW Triple Glass
The AQUA PELLET fireplace with automatic firing up and fuel dosing system.
The power range of 6-15 kW
The surface of the heated room: up to 170 m2
TRIPLE GLASS SYSTEM - reduces energy radiation through glass by 30% !
Minimum dimensions after making the LOUIS AQUA fireplace casing:
Depth: 90 cm
Width with container 45 kg: 110 cm, Width with container 30 kg: 90 cm
LOUIS AQUA 15 kW Triple Glass
The AQUA PELLET fireplace with automatic firing up and fuel dosing system.
The power range of 6-15 kW
The surface of the heated room: up to 170 m2
Two devices in one: PELLET STOVE + FIREPLACE. Heating a house with a fireplace is a pleasure, a friendly climate of fire and a significant reduction in costs and lost space for the boiler room.
Entitling you to obtain financing for the purchase
IWONA PELLETS fireplaces, as a few on the market, have a closed combustion chamber, and thus can be used in buildings, which have the installation of air recuperation. IWONA PELLETS fireplaces take 100% of air needed for combustion from the outside of the building.
Most fireplaces available on the market have the air intake outside the building, while they do not have the closed combustion chamber, in which case most combustion air is taken from the room anyway.
We were the first ones who used in the IWONA PELLETS fireplaces the mechanism cleaning the furnace patented by us allowing the limitation of the opening of the doors in the fireplace up to 1 time a month. The furnace is automatically cleaned at a specified time keeping the hearth clean.
Tthe pellet in the fireplaces are fired automatically within 5 minutes.
The intelligent controller, after exceeding the room temperature, makes the fire extinguish, while when it is reduced, it will automatically fire it again.
No more manual control of the combustion process in your fireplace!
The fireplace as a standard is equipped with the automatic combustion air intake throttle allowing the automatic adjustment of the combustion process.
In cooperation with the closed combustion chamber, the fireplace was equipped with special hot air ducts creating a unique air curtain by the glass protecting it from dirt. The glass in the IWONA PELLETS fireplace is clean for many weeks.
The fireplace as a standard is equipped with a room temperature sensor and the whole operation of the fireplace is focused on maintaining the desired temperature in the room. The controller can be equipped with an additional temperature sensor, which can be placed anywhere.
The fireplace as a standard is equipped with a weekly timer, which is used to program any temperature for any hour of any day of the week.
We have designed them so that their work is quiet, maintenance-free, clean and reliable.
The biggest advantage of our fireplaces is the economy.
Pellet consumption is very small. The adjacent pellet tray, which houses 45kg of pellet, is sufficient for 3 days of work.
The entire heating process of our house is controlled by an advanced and at the same time easy to use controller with a display controlled via a control panel or as an option via the Internet or telephone. All the elements used in our fireplaces make them fully automatic and their operation is limited to pouring pellets into the container and pressing the enable button. You can easily set the desired room temperature, and the controller will select the amount of pellets fed to keep the temperature precisely.
There is a small amount of pellets in the furnace during combustion. During a power failure or when the off command is given - the flame will go out after about 1 minute. This is a particularly important advantage for fireplaces with a water jacket.
Our pellet fireplaces as few on the market have the possibility of individual building that meets the requirements of each client.
We have designed our devices so that they are easy to install and as little as possible from standard wood inserts.
LOUIS AQUA 15 kW Triple Glass
Size |
Unit |
Measurement |
Power range |
kW |
7-15 |
Average fuel consumption at maximum power |
kg/h |
3,6 |
Average fuel consumption at minimal power |
kg/h |
1,5 |
Thermal efficiency |
% |
>90 |
Maximal output power given by the water coat, C.O power |
kW |
10 |
Average temperature of the exhaust gas EN 14875:2009 |
C |
160 |
CO content for O2 = 13% average |
mg/nm3 |
<150 |